FLIGHT TEST TELEMETRY

Large size

ARINC 429

MIL-STD 1553

RS - 232/422/485

High accuracy Analog channels with signal conditionning

Discrete channels with programmable threshold

Frequencemeter, counter, period-meter

RMS and power measurement

Wide band analog channels with signal conditioning and TEDS sensor management

Small size

ARINC 429 - MIL-STD 1553

RS - 422/485

Analog channels

Discrete channels

• 19"width, 4U height rack mounted unit
• Up to 20 large size acquisition modules on universal slots
• Halfwidth version available with up to 9 acquisition modules
• 200W or 400W power supply according to Unit load
• All connectors on rear panel allowing module replacement without withdrawal of the cables
• Optional protection against power cuts, optional alarm and monitoring modules

• 160mmx 200mm cabinet
• 8/ 12 / 16 large size acquisition modules on universal slots
• Halfwidth version available with up to 9 acquisition modules
• 200W power supply according to Unit load
• All connectors on top
• Optional protection against power cuts, optional alarmand monitoring modules

• Up to 14 small size acquisition modules
• 27 W or 55 W power supply according to Unit load
• Compact unit
• width : 104 mm
• height : 63,5 mm
• length : 57,3+8,4N (N number of modules)
  (133 mm for 9 acquisition modules)

• User dedicated CPU including 40 Mips DSP + 3MB SRAM, for down-loaded processing routines
• 6-byte date and time stamp : 1 µs resolution

• 16 individually programmable ARINC 429 channels,
• High or low data acquisition rate
• 8 and 10 bit labels, 32 bit word length, interword gap > 2 bits
• Built-inself-test including ARINC 429 electrical interface,
• Individual status for each channel

• 8 buses acquisition channels with MIL-STD-1553 Bus monitoring
• Message structure, inter-message gap, response time analysis,
• Individual status for each bus

• 8 individually programmable RSxxx channels, following EIA 232/422/485 standards
• Data rate between 150 Hz and 153 600 Hz,
• Synchronous or asynchronous operation
• 7/8 bits per character, 1/1.5/2 stop bits, even/odd/no parity
• Individual status report for each channel
• Optional full duplex links (programming of external sensors)

• 36 discrete channels with 100 kHz bandwidth
• Individually programmable thresholds (-10 to +10V, 100 mV steps)
• Logical test output available for maintenance/test purpose,
• Individual status for each channel

• 16 analog channels, individually programmable,
• DC - 3000 Hz bandwidth
• Integrated programmable signal conditioning
• 16 bit resolution, 12 bit accuracy analog todigital conversion
• Multi-sensor : PT100, strain gauge, thermocouple,analog, …
• Large choice of selectable input range : +/-16 mV to +/- 51.2 V
• Low inter-channel distortion (0.1° @ 500Hz on same unit) for correlation
• Continuous internal temperature compensation process (user transparent)
• Individual status for each channel, including sensor fault detection

• 8 individually programmable channels
• Frequency measurement (0 to 100 kHz) with 1Hz accuracy
• Period measurement (0 to 655 350 µs) with1 µs accuracy
• Counter (12, 16, 24 or 32 bits) with external trigger
• Large choice of selectable input range : +/-16 mV to +/- 51.2 V
• Programmable bandpass filter,
• Programmable thresholds
• Individual status for each channel

• 8 Individually programmable channels,
• DC - 3kHz bandwidth
• Large choice of selectable input range : +/-16 mV to +/- 51.2 V
• 1 channel ? RMS value or 2 channels ? Powervalue (V x I)
• Integrated programmable signal conditioning
• 16 bit resolution, 12 bit accuracy
• Sensor types : PT100, strain gauge, analog,…
• Digital filtering
• Continuous internal temperature compensation process
• 6-byte date and time stamp : 1 µs resolution
• Individual status for each channel, including sensor fault detection

6-byte date and time stamp : 1 µs resolution

• 16 Individually programmable ARINC 429 channels,
• High or low data acquisition rate
• 8 and 10 bit labels, 32 bit word length, interword gap >2 bits
• Built-in self-test including ARINC 429 electrical interface,
• Individual status for each channel

• 2 buses acquisition channels with MIL-STD-1553 Bus monitoring
• Message structure, inter-message gap, response time analysis,
• Individual status for each bus

• 2 individually programmable RSxxx channels, following EIA 422/485 standards
• Data rate between 150 Hz and 153 600 Hz, asynchronous operation
• 7/8 bits per character, 1/1.5/2 stop bits, even/odd/no parity
• Individual status report for each channel

• 20 discrete channels with 100 kHz bandwidth
• fixed thresholds (-10 to +10V, 100 mV steps)
• Individual status for each channel

• 16 or 8 analog channels, individually programmable,DC - 3000 Hz bandwidth
• Integrated programmable signal conditioning (8 channels version)
• 16 bit resolution, 12 bit accuracy analog to digital conversion
• Factory configured multi-sensor acquisition
• User programmable digital filter
• Individual status for each channel, including sensor fault detection
• Custom design on demand. Consult us for more details

• Management and control of all the modules of the unit
• 1 per unit (rack-mounted or stand-alone chassis)
• Recovery of all acquisition data from modules inside unit,
• Acquisition of IRIG time
• Generation of PCM message according to format
• Generation of unit status message
• Interconnection between units via ADSL link

• Input voltage : 24 - 32 VDC
• Ouput voltage : + 15 VDC, -15 VDC, + 5 VDC
• Protection against short-circuit and over-voltage,
• Protection against excessive temperature rise
• Power-on in-rush current limiting,
• Protection against input power supply short cuts
• Status reported to M&C link
• 100 W or 200 W ; 27 W or 55 W